The main goal of any cell phone signal booster is to capture the signal cell that is found outside your house and amplify the signal and distribute it to areas that do not have a strong signal. Typically, a signal amplifier system is composed of several key components, such as external antenna booster that serves to strengthen the received signal that will be routed through the cable connecting the various components.
A cell phone signal booster is designed to run 3 functions; catching signal, amplifying the signal that has been captured, and sending the signal to areas with a weak signal. The primary requirement is a stable signal since a cell phone signal boosters cannot create signal as they only capture, amplify and broadcast cellular signal.
A cell phone signal booster is only able to work in an ideal condition. An ideal state or condition is able to provide a stable signal for the external antenna, and allowing the internal antenna to be positioned in a location capable of broadcasting signal to different areas without obstacles.
3. Signal Power
The signal strength is determined by the area to be served. If you do not have a strong external signal, then use small coverage areas. Always consider the square footage listed on any packaging signal amplifier. Understanding of the bar is a very important signal to every single external antenna placement. We all know that there is no official standard that connects the cell phone signal to the bar but we have to be vigilant if we see less than 5 bars. You may need to do a field test, which allows the decibel reading related to the transmitted signal. To get an instant way, you can get your reliable signal booster by buying it from MyAmplifiers.
4. External Antenna
Generally there are two types of external antenna, the Omni-directional and Yagi. Omni is designed to transmit signal in different directions, while yagi serves to transmit signal towards the particular direction. Yagi has a coverage area that is smaller than what owned by Omni.
5. Power Amplifier
Amplifier is measured in decibels (dBs), a standard way to determine the strength of the signal. The decibel is based on a logarithmic calculation. Each increase of 3 decibels, the power amplifier gets 2-fold increase. For personal use, Yagi is preferable. Yagi is used for signal amplifier that is connected to the laptop.
6. Panel Antenna and Dome Antenna
Panel antenna is designed to distribute the signal in accordance with some area-related parameters. This type can be mounted on the wall surface and is commonly used in office spaces. The dome antenna is mounted on the ceiling of a house with the intention of broadcasting signal to underneath area.
7. Types of Cable
Cable serve as a liaison in all systems, including the system of signal amplifier. But the cable may lose some signals related to several parameters such as the constituent materials, quality, and the length and width of the cable.
I hope some of the above tips can help you in selecting the best signal booster system.